Tgk 创建 Bolt Joint Task¶

🟣 Max 📌 Advanced _{GUID: {A1B2C3D4-0003-4001-8001-000000000012}}

CreateBoltJointDesignTask · Component\_6_Design_OpenSees\Comp_Design_OpenSees.TimberConnections.cs

创建。

参数	缩写	类型	说明
Connection Mode	CM	BoltJointConnectionMode	Single or double shear connection mode.
Fastener Kind	FK	BoltFastenerKind	Bolt or nail fastener kind.
Diameter	D	double	Fastener diameter in mm.
Thin Thickness	Ts	double	Thin member thickness in mm.
Thick Thickness	Tm	double	Thick member thickness in mm.
Fasteners Per Row	FPR	int	Fasteners per row.
Total Fasteners	TF	int	Total fastener 数量。
Main Species	MS	string	Main member species key.
Side Species	SS	string	Side member species key.
加载角度	A	double	加载-to-grain 角度 in degrees。
钢结构 Side	Steel	bool	Whether side member is 钢结构。
钢结构 Bearing	Fes	double	钢结构 side bearing strength in MPa。
Moisture	MC	double	Moisture percentage.
High Temperature	HT	bool	Whether long-term high temperature applies.
Yield Strength	Fyk	double	Fastener yield strength in MPa.
Demand Shear	V	double	Demand shear in N.

参数	缩写	类型	说明
Task	T	BoltJointDesignTask	Bolt joint design task.

参数	缩写	类型	说明
Bolt Joint Task	BJT		Bolt or nail joint design task.

📝 补充说明¶

（此处可手动补充使用示例、注意事项等）